The Introduction of Modular Preform Moulds

A preform mold is a mould used to produce a particular type of plastic material. The steel used for the mold is either S136 or 2316. Its sliders and core inserts are sometimes titanized. The surface of these metal components has a gold hue. S136 steel has a vacuum quenched hardening treatment and is capable of reaching 48-52HRC. The mold can also be made from alloy brass for its strip plate, which has a high rate of cooling. Preform moulds are also made of PC, PP and PET.

A high-output molding system allows you to change part weight by changing the cavity and gate inserts. It can also change the outside dimensions of the part by changing the take-out tubes. More than one type of preform mould can be produced with a single mold, by mixing different types of cores and preform weights. A single mold with multiple cores is more versatile. It can produce more than one type of preform, depending on its design and parts.

An excellent preform mould should be made from alloy brass. HRC45 or HRC48 steel is suitable for some applications. It is also possible to use a titanium or aluminum core. The mold handles should be tipped to improve efficiency. Alloy brass and other non-ferrous metals are good choices. But if you're going to use a plasticizer, make sure to check the material and the strength of the preform mold.

Construction

Generally, the construction of preform moulds involves the reshaping of a preform to a desired shape. However, there are several aspects that are important to take into account when designing the mould. For instance, a mould with a cold runner system must be much larger than a standard mould, and the mould must be able to accommodate the runner and any sliding mechanisms. These factors complicate the design and construction of preform molds, making them difficult to use and maintain orientation during complex part designs. Moreover, the mold may require longer process times and the need to modify the part. Furthermore, the atypical aesthetics of the part may call for extra consideration in mold design.

To get a high-quality preform mould, it is important to consider the machining process. The first step is to determine the components that make up the mould. The next step is to consider the size and shape of the preforms. These factors will determine the final size of the mould and the shape of the preforms. The machining process will determine whether the mould is durable, flexible, or prone to breakage.

Modular design

The Modular design preform mould comprises individual modules which are connected to each other by means of a central control. In the illustrated embodiment, the moulding modules are disposed between one another in the transport direction and are connected by means of a bus system. The modules are characterized by interfaces, which are either drill patterns or pins, which enable mechanical connection. The modules can be installed in any sequence. Moreover, a sterilisation unit can be installed between moulding and heating modules.

A Modular design preform mould can accommodate two or more mould designs, including different shapes and sizes. The system's interchangeable base plates allow for a range of design options, and the process of changing mould assemblies is much simpler than with other mold types. It can also handle different preform lengths and shapes, and its tooling cost is lower than with traditional mould designs. The mold can also be used for various types of applications.

There are many considerations in thermal gating of a preform mould. One of these is the location of the gate. For some products, the gate must be positioned in the center of the gear to facilitate optimal filling. The thinner the wall of the mold, the lower the temperature drop during the molding process. This also prevents the formation of flow marks caused by uneven heat distribution. A runner keeps the melting melt hot until it enters the mould.